How to Use Freeze Dry Machine - Honda FCX Forums
Honda FCX Forums  
Go Back   Honda FCX Forums > Off Topic > Off Topic Talk

FcxClub.com is the premier Honda FCX Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-04-2019, 09:19 AM
gffreezedrymachine gffreezedrymachine is offline
Junior Member
 
Join Date: Dec 2019
Posts: 1
Default How to Use Freeze Dry Machine

The principle of the vacuum freeze dry machine is to pre-freeze the aqueous sample and then sublimate the water under vacuum to obtain a dried sample.

1. The sample to be lyophilized should be frozen in the refrigerator. At the same time, the bottle mouth should be sealed with a sealing film or plastic wrap, and the holes should be tied.

2, check before starting (power, vacuum pump, etc.)

(1) The vacuum pump is placed on the ground and maintains a constant height difference from the main unit. Prevent sudden power outages and generate oil return. In the event of a power outage, immediately unscrew the inflation valve and take out the sample as soon as possible.

(2) Vacuum pump oil of freeze dry machine should be replaced regularly, pay attention to maintenance. The oil star is observed through the glass window, and it is best to control it at about 2/3. It is easy to appear oil injection phenomenon, and too little is likely to cause insufficient vacuum.

3. Turn on the main power switch and press the “Refrigeration” button. The instrument needs to be cooled for half an hour before use.

4. Take the sample to be lyophilized out of the refrigerator and put it on the plexiglass cover to check if the “O” ring is sealed. Then press the stainless steel piece on the inflation valve and pull out the small tube to seal the instrument.

5. Press the “vacuum gauge” button to display the vacuum degree; press the “vacuum pump” button again to operate the vacuum pump.

6. After lyophilization, first unscrew the inflation valve on the freeze dry machine to inflate, let the air enter slowly, and then close the vacuum pump to prevent the vacuum pump from returning oil. Turn off the vacuum gauge, cooling button, and total power. Finally, remove the plexiglass cover and take the sample out for storage.

7. Finally, the ice in the cold trap of freeze dry machine should be cleaned up for convenient use. For more information on Freeze Dry MachineSolution , including its history and applications, check out the links below gf-machine.com
Reply With Quote
Sponsored Links
Advertisement
 
  #2  
Old 06-22-2020, 09:51 PM
Pitturstar's Avatar
Pitturstar Pitturstar is offline
Junior Member
 
Join Date: Jun 2020
Location: Pittsburgh
Posts: 16
Default

Thanks for the tips!
Reply With Quote
  #3  
Old 07-01-2020, 11:29 AM
pixexe6796 pixexe6796 is offline
Junior Member
 
Join Date: Jun 2020
Posts: 28
Default

Good advice!
Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:04 AM.



Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2006